Carbon-TiX-Cap Carbon Matte Stem Cap

$22.00

Built for

road
gravel
mtb

This pairs well with

You may also need

Carbon-Ti X-Cap TORX Spare BoltSmall part

Specifications

Steerer size	Weight
1 1/8"	5.2 g
1 1/4" Over Sized	5.5 g

Cap material: 3K carbon fiber
Cap finish: Matte
Bolt: AL7075-T6 aluminum
Color anodized
TORX T25
What the color changes: The bolt. The cap is matte carbon in every option.
Color choice: 9 colors
Made in: Italy

What's included

One Carbon-Ti X-Cap Carbon Matte Stem Cap (in the size you select)
One AL7075-T6 aluminum TORX bolt (in the color you select)

Not included: A star nut or an expander plug, and a TORX T25 wrench. A top cap needs a star nut or an expander plug already fitted in the steerer for the bolt to pull against.

The matching expander plugs are:

The Carbon-Ti X-Plug for a 1 1/8 inch steerer
The Carbon-Ti X-Plug OS for a 1 1/4 inch steerer

Will it fit your bike?

Compatible with

Threadless headsets with a 1 1/8 inch steerer, using the standard cap
Threadless headsets with a 1 1/4 inch Over Sized steerer, using the Over Sized cap
Carbon, aluminum and steel steerers, with a star nut or an expander plug already fitted
Road, gravel and mountain bikes alike

Not compatible with

Threaded headsets, which use a locknut rather than a top cap
Steerers with no star nut and no expander plug fitted
Steerer diameters outside 1 1/8 inch and 1 1/4 inch

Confirm before ordering

If you are not sure of your steerer size, or whether a star nut or expander plug is fitted, check with your bike mechanic.

You can also contact Hammer & Howl before ordering.

Two things decide fit: the steerer diameter and what is already inside the steerer.

Select the standard cap for a 1 1/8 inch steerer and the Over Sized cap for a 1 1/4 inch steerer. The steerer needs a star nut or an expander plug fitted, because that is what the top cap bolt pulls against to set your headset preload.